- messsung 2 verschiedende welllenformen:
R51 muss 51K sein statt 430ohm - R2 51k zu 36K
- 36K U1 pin6
muff: http://electro-music.com/forum/topic-18587-100.html
I've taken the board out, and have gone over it. No wrong resistors. Bear in mind that this is a copy of Dave Brown's build (and using his BOM), so there are some resistor changes - specifically R2 changed from 51K to 36K, and R51 is changed from 430 to 51K. There is also a 36K resistor added at pin 6 of U1. Would any of these make this effect? (Feel free to chime in, Dave, if you had a similar problem - probably not though)