You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 20 Next »

Project

Projecttitel: Arp1601 Clone

Status: FINISHED

Startdate: end of 2014

Duedate: Summer 2015

last update: 01 Jun 2015

 

 

Muffwiggler Thread:

https://www.muffwiggler.com/forum/viewtopic.php?t=110640

Muffwiggler Build Thread

https://www.muffwiggler.com/forum/viewtopic.php?t=138862

 

  File Modified
No files shared here yet.

 

 

BOM:

please see attachment list above

the file: ARP1601_PartList_ sorted is sorted for resistor and capacitor values -please use this for building ARP 1601 Parts List_sorted.xls

for Kipplings groupbuy round2 you need a 12uH Inductor and 47uF/25V cap too  (this parts are not in the BOM)

Mouser part nr.: 652-RLB9012-120KL and 1-off 667-EEU-EB1E470SH


for Round 1 BOM: dont buy the expensive ferrit bead on mouser.. this part dont fit.

please use: 2x  875-28L0138-80R-10

 

 

keycapps: 3 needed -   kit includes 14 (instead of 13)

Builders Guide:

Error rendering macro 'viewpdf'

com.atlassian.confluence.macro.MacroExecutionException: com.atlassian.confluence.macro.MacroExecutionException: The viewfile macro is unable to locate the attachment "ARP 1601 Sequencer Build Guide Rev1.pdf" on this page

 

Schematics (round 1)

ARP 1601 Sequencer - Schematic (round 1).pdf

Panel:

Error rendering macro 'viewpdf'

com.atlassian.confluence.macro.MacroExecutionException: com.atlassian.confluence.macro.MacroExecutionException: The viewfile macro is unable to locate the attachment "ARP 1601 Panel with dimensions.pdf" on this page

 

 

Gallery shows Sequencer build from LED-man
There are no images attached to this page.

 

 

  • No labels