(last update 17.Dec.2020 - Firmware)
Kijimi-manual-Draft-Version.pdf (early draft)
Latest Firmware (Dezember 2020)
Kijimi.Update.Pack.1.3.6.zip. (firmware 1.3.6)
Release Notes (1.30 - 1.3.6)
Kijimi 1.3.6: Fixed a bug in which SYSEX messages were not transmitted or received over DIN5 connections. Kijimi 1.3.5(If you are updating from 1.1.0 or earlier, also read
the Release Notes for 1.3.0):
Connectivity with Babu Frik, Droidsmith (Editor) for Kijimi (hey hey!). Babu Frik may be downloaded here: https:// ritaandaurora.github.io/kijimi-babu-frik/ Improved Preset Selection: Turn encoder to choose PRESET (same as
before) to switch BANK, hold shift while turning the encoder.
Improvements in Microtuning functionality.
Tuning programs are automatically saved to the first empty slot with names. Use a Sysex librarian to upload a Scala program (.scl) after converting it to MIDI Tuning Standard (.syx) here:http://www.microtonalsoftware.com/scl-scala-to-mts-converter.html Kijimi has 128 slots for Microtuning program presets.
More information about scala and Microtuning and a plethora of tunings programs can be found here:http://www.huygens-fokker.org/scala/downloads.htmlGeneral bug fixes and workflow improvements.
Randomize all Parameters = SHIFT + SYNC or send ON message to CC31
Improved Arpeggiator Functionality. Hot Keys to activate Arp =
SHIFT + K.T.
Hold - Works as a LATCH when Arpeggiator is on, works as a HOLD/
DRONE when arpeggiator is off. LATCH/HOLD = SHIFT + KEY OFF
Separate settings for COMMON/INDIVIDUAL ADSR2 and LFOs LFO Poly re-trigger.
Saving function reworked to allow for intuitive saving and
allowing for editing of Factory Presets.
In SAVE and LOAD modes, BANK is selected by holding SHIFT and
turning the encoder or pressing UP/DOWN.
Separate Reset Factory Settings and Reset Factory Presets.
Increased Dead Zone for Center Detent positions on the knobs.
Bugfixes Fixed bugs in which Presets sounded different when restarting the
unit.
Fixed 2/4 cards per voice freezing in MPE mode. Other minor bugs and fixes under the hood. |
Kijimi Factory Presets MJ (1.2).syx (presets - transfer it with sysexlib. per KIjimis USB-Midi-interface)
Black Corporation Firmware Updater.app.zip (only for updater not for first install) - do not work on Catalina
Kijimi1.1.0.bin(only for updater not for first install)
kijimi_1.2_package_build_by_DSL-man.zip (includes latest Firmware and presets, Updatetool) NEW
make sure you perform the calibration of the knobs again as described (Potentiometer Calibration : Important: turn all pots to the right side (max) then only turn the center detent knobs to middle position for the center detent calibration. for the second step turn all knobs to right (max) position
Firmware 1.2: release Notes
click to expand:
Change log: 1.2 1. 16+ LFOs! To activate, (SETTINGS->LFO->MOD MODE->INDIVIDUAL) To operate, select destination mode (Positive, Negative, Bipolar). Long press (Press and hold for approximately 1.5 seconds) the destination selector until flashing. The LFO parameters to the flashing destination may be adjusted with information presented in the display. Multiple destinations in one row may be selected in order to affect all of those destinations with shared values. If multiple destinations in different rows are selected, parameters for destinations in the first row may be adjusted with the LFO1 controls and parameters for destinations in the second row may be adjusted with the LFO2 controls. In this case, both LFO1 and LFO2 settings will appear on the display. Once LFO adjust mode is activated (flashing), other LFOs may be selected by selecting them with a regular non-long press. Additional LFOs may be grouped with an existing group by long pressing the new destination while the first group is flashing. A quick press of a flashing destination will deactivate LFO adjust mode and return to destination toggle mode. 2. Arpeggiator 2.1 Styles: 2.2 Rate 2.3 Randomizer 2.4 Velocity + a new bank by Richard Devine! |
The Bootloader is in the DIY Build Guide Page:
Thanks to all Kickstarter backers