Projecttitel: USB MIDI Interface
Status: DONE
Startdate: 04/2020
Duedate: 06/2020
Manufacture link:
Specs:
5x MIDI IN and5x MIDI Out with USB2.0
The Software/Firmware is from ploytec and used in many commercial products.
PCB and Preprogrammed chip is available from me (until all pcbs are gone) on diysynth.de
BOM:
https://docs.google.com/spreadsheets/d/1u6wgABhqt0vknTZJFNVShALNdmQvRK_okAad-lOCuyc/edit#gid=0
(Screws, spacers, LEDs and LED holder are not in the BOM)
Addional parts which are not in the above BOM:
When you want the plastic/ABS case, order this 3 parts from TME.eu
Case: G17081UBK Gehäuse:standardmäßig 19";1U;schwarz;Mat.Geh:ABS;Y:203mm
USB adapter:
CP30111 Adapter;USB A Buchse-Hinterteil,USB B Buchse-Vorderteil;FT ROHS Hersteller: CLIFF
USB cable for inside:
CAB-USBAB/0.19 Kabel;USB 2.0;USB A-Stecker,USB
2 Comments
Gregory Delabelle
Hello Patrick,
a couple of questions:
thx
G
LED-man
Hi Greg.
The preprogrammed mikrocontroller comes with the PCB.
The firmware is absolutely stable and there’s no update needed.
You can send me an email to order an pcb plus mikrocontroller.
The case is from tme and costs around 15€ netto.