...
As part of the "01" sub-series the PCB is compatible to Eurorack as well as MOTM. (-12/12V & -15V/15V) Supported Power Header formats are 10/16 pin Euro and MTA 156. The module is protected by diodes rectifiers and provides power capacitors.
You won't find the usual filter resistors or beads, because there won't be voltages spikes induced by this module. The linear regulator and the caps are just fine. Since there is nearly no power soak at the reference voltage, the OpAmps will prevent voltage interference from the distribution board.
BOM:
ID | ID-PCB | Casetype | Amount | Designator | Source |
1 | D1,D2 | D_DO-41_SOD81_P10.16mm_Horizontal | 2 | 1N4001 | |
2 | REF**,REF**,REF**,REF** | 1pin-vdd | 4 | 1pin | |
3 | C1,C2 | CP_Radial_D5.0mm_P2.00mm | 2 | 10µF | |
4 | C3,C4 | CP_Radial_D5.0mm_P2.00mm | 2 | 1µF | |
5 | C5,C6,C7,C8,C9,C10,C11,C12 | C_Disc_D5.0mm_W2.5mm_P2.50mm | 8 | 100nF | |
6 | J1 | MTA-100-3p | 1 | CV1 100KB | |
7 | J2 | MTA-100-3p | 1 | CV2 100KB | |
8 | J3 | MTA-100-3p | 1 | CV3 100KB | |
9 | J4 | MTA-100-3p | 1 | CV4 100KB | |
10 | J5 | MTA-100-3p | 1 | CV5 100 KB | |
11 | J11 | MTA-100-2p | 1 | CV4 | |
12 | J12 | MTA-100-2p | 1 | CV5 | |
13 | J13 | MTA-100-2p | 1 | CV1 | |
14 | J14 | MTA-100-2p | 1 | CV2 | |
15 | J15 | MTA-100-2p | 1 | CV3 | |
16 | P2 | Pin_Header_Straight_2x08_Pitch2.54mm | 1 | EURO - optional | |
17 | R1,R2,R3,R4,R5,R11,R12,R13,R14,R15,R16,R17 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 12 | 1K | |
18 | R6,R7,R8,R9,R10 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 5 | 100K | |
19 | U1,U3,U5 | DIP-8_W7.62mm | 3 | TL082 | |
20 | U2 | TO-92_Inline_Wide | 1 | 7805 | |
21 | P1 | MTA156 | 1 | MOTM -optinal | |
22 | J6 | Cliff1384 | 1 | Out-CV1 | |
23 | J7 | Cliff1384 | 1 | Out-CV2 | |
24 | J8 | Cliff1384 | 1 | Out-CV3 | |
25 | J9 | Cliff1384 | 1 | Out-CV4 | |
26 | J10 | Cliff1384 | 1 | Out-CV-5 |
Schematics: